Photo-Activated Disinfection Medical Laser Equipment/F3wwpad Light Dental Oral Laser Treatment

Basic Info

Model NO.	1600100100 Low level laser
Applicable Departments	Oral Department of Internal Medicine
Certification	CE
Type	Cleaning & Filling Teeth Equipments
Sku	1600100100
Transport Package	Standard Carton
Trademark	AZDENT
Origin	China

Product Description

Photo-Activated Disinfection Medical Laser Equipment/F3WWPAD Light Dental Oral Laser Treatment

 

1.1 DESCRIPTION

Photo-Activated Disinfection technology is based on two components to selectively tag and destroy cariogenic bacteria and periodontal pathogens:
a solution of dilute, pharmaceutical grade tolonium chloride (a vital stain)
and light of a specific wavelength (650 nm) to activate the solution.

Photo-Activated Disinfection(PAD) Light-F3WW provide the light of a specific wavelength (650 nm) to activate the solution.

Introduced into dental hard or soft tissue, the solution of dilute, pharmaceutical grade tolonium chloride (a vital stain) selectively targets and tags all bacteria. When the solution is activated by the Photo-Activated Disinfection(PAD) Light-F3WW,it releases singlet oxygen which ruptures the cell walls of bacteria, killing them in seconds.

 

1.2 Indications for Use

Photo-Activated Disinfection(PAD) Light-F3WW is equally effective to activate the solution on the bacteria found in root canals, periodontal pockets, periimplantitis,carious teeth,Infection control and pain relief.

Kills all bacteria including:
• Streptococcus mutans
• Total streptococcus
• Streptococcus sobrinus
• Streptococcus intermedius
• Actinomyces
• Lactobacillus
• veilonella
• Prevotella intermedia
• Peptostreptococcus micros
• Fusobacterium nucleatum
• Porphyromonas gingivalis
• Staphaloccoccus aureus
• E.faecalis


2.1 Product content

The shipping box should contain the following device components:

Description	QTY
PAD Light main body	1
Magnetic rechargeable battery	1
Goggle	2
Light rob	2
Charge station	1
Power Adapter	1
Disposal Tip	20
User Guide	1

2.2 CLEANING AND STERILIZATION BEFORE USE ON PATIENTS

The PAD Light and accessories are provided non-sterile. Cleaning and sterilization of accessories and components that come in contact with open tissue is required prior to use on patients.
2.3 Safety

Do not stare into the visible light. Laser light is emitted from this device. Avoid extreme exposure. Do not point the device at anyone's eyes.

2.4 BATTERY CHARGING

The device will need to be fully charged prior to the first use. Plug the AC recharging power cord into the unit and then into the wall socket. Charge for at least 12 hours before the first use.
Recharge the device at least once every 3 weeks whether you have used the device or not.
Put battery into the cylinder of the the charge station ( Contact PCB faces down), the green light turns on when it's charging, the light will turn off when the battery get full charge. It's about 2 hour to get full charge.


3. OPERATING INSTRUCTIONS

1.Push the Power/Select Button to power on the light.
2.Push the Power/Select Button to select the seconds for the procedure.
3.Push the Light Button to activate the Light.
4.Push the Light Button to stop the light.

When the light is activated,there is a "bee" tone in every 30seconds.
Note:The light will be turned off after 3 mins without any operation.
Pull out the battery to stop the power.


4.WARNINGS

•Because the device contains a laser, do not shine it directly into your eyes or look directly at the laser light. Do not point the PAD Light device at your or another person's eyes.
• The safety of laser devices on pregnant women has not been established.
• Avoid use of the PAD Light device over, or in the area of, cancerous lesions.
• The device should not be used during the following activities:
• bathing or showering
• sleeping
• driving or operating machinery

5.MAINTENANCE

Like any electronic product, the PAD Light requires proper care and handling. The following is recommended:
• Do not drop the device or handle it roughly.
• Do not immerse the device in water or any liquid.
• If using the device on more than one person, sterilization of light rob for each use.

 

6.Technical Specification

Wavelength	650nm ± 5nm
Power	200mw
Diameter	18.5mm
Weight:	1100g
Length without a light rod	102mm
Magnetic Rechargeable Battery:	Lithium Ion
Diameter of the out put of the light rod	6mm
Power supply	3DV rechargeable batteries
Button control
Sound signalisation
Magnet coupled rechargeable batteries
Continuous model of the laser beam

Packaging: Mainly packed by carton or other common security package, you also can give us your special requirments about it. We will try our best to make sure the goods arrive safely. Shipment:1. Your order will be sent via International Express(DHL,Fedex,UPS, TNT or EMS) after you finish the payment.2. We will offer the tracking number for you to check the status of your items online at any time.3. It usually takes about 3-8 days for customers to receive their items.But some times, it will take more time for custom to handle it, so you should wait 2-3 days more.Our services:Pre-sale service:1. 24 hours online, please feel free to contact us anytime.2. Provide our customers best quality product.3. High degree of expertise to solve any problems After sale service:1. Fast delivery with tracking number provided to make sure ou can receive your goods fast and safety.2. Offer free warranty service.3. Focus on every client's satisfaction. Professional team will solve any problems you may meet In the process of using.Other Dental Products for Your Choice:

FAQ:1
Q:Can I have a sample order? A:Yes, we welcome sample order to test and check quality. 2
Q:What about the lead time? A:Sample needs 3-5 days, mass production needs 1-2 weeks depends on order quantity.3
Q:How do you ship the goods and how long does it take to arrive? A:We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.Any questions, please send us message freely!